Gutter vacuum sections
A modular tube carries air and debris. The bore, joint seal and connection security matter as much as the tube length. Explore gutter vacuum poles ↗
CUSTOM MANUFACTURING / PRACTICAL SPECIFICATION
Cleaning poles.
Start with the tube.
Custom carbon fibre sections for cleaning equipment. Specify the tube, understand the joint, then define the complete assembly.
Gutter vacuum sectionsWater-fed pole componentsOEM enquiries
CUSTOM LENGTHS / METRES & FEET
Any required length from 6 to 20 metres.
We manufacture telescopic cleaning poles to your required extended length anywhere within 6–20 m (approximately 19.7–65.6 ft). This is a continuous custom range, not a choice of only three fixed models. For example, you can request 7 m, 9.5 m, 12 m or 16.5 m.
6 m ≈ 19.7 ftYOUR LENGTH, THROUGHOUT THE RANGE20 m ≈ 65.6 ft
Tell us your required length in metres or feet. As a conversion example, 12 m ≈ 39.4 ft. The stated length is the fully extended pole, not working height. Section count, closed length and retained overlap are designed around your required length.
CLEANING POLE STYLE OPTIONS
Cleaning pole styles, up close.
Compare clamp layouts, handles and water-fed brush arrangements. Final clamp design, colour and accessories are agreed with your quotation.
Blue lever clamps
AI-edited supplier reference showing nested tubes, blue lever clamps and a water-fed brush.
Orange lever clamps
Telescopic pole style with orange clamps and a blue padded handle.
Water-fed brush assembly
Black telescopic pole with a water hose and brush attachment.
Black, white & green clamp styles
Three clamp colour arrangements for comparing the appearance of telescopic pole components.
AI-edited style references. Final appearance and dimensions are confirmed with your sample.
WORKSHOP / APPLICATIONS
Two systems. Different jobs.
Water-fed telescopic poles
Nested round tubes support a brush and hose. Sliding fit, overlap and clamp behaviour are central to the design. Explore water-fed poles ↗
WORKSHOP / DIMENSIONS
Start with the right dimensions.
Compare modular suction sections with made-to-length telescopic poles. Each system has its own tube and connection requirements.
Dimensions in millimetres unless shown otherwise. Scroll sideways on a small screen.
| Application | Dimensions & custom range | Specify next |
|---|---|---|
| Gutter vacuum sections | 44 or 50 mm diameter; 1.5 m sections | Bore, end geometry, joint engagement, hose cuff |
| Water-fed telescopic assemblies | Any custom length within 6–20 m / approx. 19.7–65.6 ft | Actual extended length, closed length, brush and hose |
| Custom tube components | Drawing-led diameter, wall and length | Surface, fit, clamp zones, machining |
WORKSHOP / SELECTION
Build around the application.
A tube or a complete assembly?
Tell us whether you need bare sections, machined ends or an assembled pole. Clamps, brush heads, hoses and connectors must be listed separately in the supply scope.
Where does the load enter?
Share the tool mass, operating orientation, contact force and connection arrangement. A longer pole cannot be specified by length alone.
What will you check?
Agree sample dimensions, fit and relevant assembly tests. Weight and stiffness belong to the confirmed build, not a generic carbon-fibre claim.
Take the next step.
MORE APPLICATIONS / SAME MANUFACTURING KNOW-HOW
Match the pole to the job.
LET’S MAKE IT CLEAR.
What are
you building?
You don’t need a complete specification to start a conversation. Tell us the application and what you know so far.
sales@fibreparts.com ↗